FAQ

A: Haifei yɛ mfiridwuma welding mfiri yɛfo a ɛwɔ Jiangyin, Jiangsu, China. Yɛyɛ nhyehyɛe na yɛyɛ diffusion welding mfiri, resistance spot ne projection welders, seam welding nhyehyɛe, ultrasonic dade welders ne customized welding automation.

Mfiri nhyehyeɛ, fixture nkɔsoɔ, anyinam ahoɔden sohwɛ, nhyiamu ne sɔhwɛ no, adwumakuo korɔ no ara bɛtumi ayɛ ho nhyehyɛeɛ.

A: Wɔde Haifei sii hɔ wɔ afe 2009 mu na ɛde n’adwene asi mfiridwuma mu welding mfiri ne customized automation ama dwumadie a ɛka ho ne anyinam ahoɔden conductors, kar afã, ahoɔden akoraeɛ afã, waya harnesses ne dadeɛ nhyiamu.

A: Haifei adwumayɛbea no wɔ 28 Shuiyun Road, Yuecheng, Jiangyin, Jiangsu Mantam, China. Adwumayɛbea no kɛse bɛyɛ m2 10,000 na ɛboa nnwinnade nhyehyɛe, nhyiam, sɔhwɛ ne adwuma no a wɔde ma.

A: Yiw. Adetɔfoɔ bɛtumi ayɛ nhyehyɛeɛ akɔ adwumayɛbea hɔ akɔhwɛ adwumayɛbea hɔ, ahwɛ nnwinnadeɛ nhyehyɛɛ mu, asusu adwumayɛbea ahwehwɛdeɛ ho na wɔahwɛ nhwɛsoɔ welding anaa mfiri sɔhwɛ berɛ a ɛfata.Yɛsrɛ sɛ di kan yɛ nhyehyɛeɛ sɛdeɛ ɛbɛyɛ a adetɔn ne mfiridwuma kuo a ɛfa ho no bɛtumi asiesie wɔn ho ama nsrahwɛ no.

A: Haifei yɛ adwuma wɔ ISO 9001 nhyehyɛe a wɔde hwɛ nneɛma pa so. Wobetumi de CE, 3C ne nkrataa afoforo a ɛfa mmara sodi ho ama sɛnea mfiri nhyehyɛe, baabi a wɔrekɔ gua ne adwuma no kɛse a wɔasi so dua te.

A: Nneɛma titiriw a wɔyɛ no bi ne:

• Kɔbere ne aluminium diffusion welding mfiri
• MFDC spot ne projection welding mfiri ahorow
• Capacitor discharge welding mfiri ahorow
• Servo-a wɔhwɛ welding mfiri so
• MFDC seam welding mfiri ahorow
• Ultrasonic dade welding mfiri ahorow
• Automatic nut projection welding nhyehyɛe ahorow
• Kɔbere braid dwumadie mfiri
• Robotic welding adwumayɛbea ahorow
• Mfiri a wɔde yɛ welding ne nhama a wɔde yɛ nneɛma a wɔayɛ no sɛnea wɔpɛ
• Welding controllers, transformers ne nnwinnade a ɛboa
• Welding su a wɔhwɛ so nnwinnade

Nsiesiei a ɛwɔ hɔ no gyina adwuma, nhyehyɛe, nea efi mu ba ne automation level a wɔhwehwɛ so.

A: Ɛsɛ sɛ wɔpaw afiri no bere a wɔasan ahwɛ mu awie no:

• Adwumayɛ nneɛma ne nea wɔde kata so
• Ankorankoro layer ne ne nyinaa thickness
• Adwuma a wɔde yɛ adwuma no nsusuwii
• Joint nhyehyɛe ne weld gyinabea
• Weld ahoɔden anaa conductivity a wɔhwehwɛ
• Cycle bere ne da biara da output
• Nneɛma a wɔyɛ no mu nsakrae
• Ɔkwan a wɔfa so de nneɛma gu mu ne nea wɔde yi fi mu
• Nhwehwɛmu ne traceability ahwehwɛde ahorow
• Factory ahoɔden a wɔde ma, mframa a wɔahyɛ no den ne onwini tebea

Mpɛn pii no, mfonini a wɔde yɛ ade nkutoo nnɔɔso. Mfonini ahorow, nneɛma a wɔakyerɛkyerɛ mu ne nhwɛsode ahorow ma kwan ma wɔyɛ nhwehwɛmu a wotumi de ho to so kɛse.

A: Yɛsrɛ sɛ fa nsɛm a edidi so yi pii ma sɛnea wubetumi:

• 2D anaa 3D adwumayɛ afiri a wɔde yɛ mfonini
• Nneɛma grade ne soro a wɔde kata so
• Thickness, cross-section anaa dodow a wɔde foil layers ayɛ
• Welding beae ne joint nhyehyɛe
• Mprempren ɔkwan a wɔfa so yɛ nneɛma
• Weld ahoɔden a ɛhia, conductivity anaa leak-tightness
• Bere a wɔhwɛ kwan sɛ ɛbɛkyinkyin anaasɛ da biara da aba
• Product models a wɔde afiri koro no ara bedi dwuma
• Manual, semi-automatic anaa automatic koraa ahwehwɛde
• Mpɔtam hɔ voltage, frequency ne factory utilities

Sɛ wɔantumi ankyɛ mfonini bi mfiase no a, wobetumi de mfonini ahorow a emu da hɔ ne nsusuwii atitiriw adi dwuma de adi kan abɔ nkɔmmɔ.

A: Haifei betumi ayɛ mfiase welding parameters bere a mfiri commissioning anaa nhwɛsode sɔhwɛ. Parameters betumi ayɛ welding current, electrode ahoɔden, welding bere, bere a wɔde kura, wheel ahoɔhare anaa nhyehyɛe foforo-specific nhyehyɛe.

Ɛsɛ sɛ wɔde adetɔfo no nneɛma ankasa, adwumade a wɔma ho kwan ne gyinapɛn a wogye tom di dwuma de di dwuma de hwɛ sɛ nneɛma a wɔyɛ no awiei koraa no yɛ nokware. Ɛnsɛ sɛ wɔpaw wɔn fi generic parameter table nkutoo mu.

A: Haifei yɛ nnwinnadeɛ a wɔde yɛ kɔbere, aluminium ne dadeɛ a wɔapaw a ɛnyɛ nsɛ-dadeɛ dwumadie. Adeyɛ a ɛfata no gyina nneɛma a wɔaka abom, ɔfasu tebea, ne kɛse, nkwaa nhyehyɛe ne adwumayɛ ahwehwɛde so.

Ɛsɛ sɛ wɔsɔ kɔbere-kɔ-kɔbere, aluminium-kɔ-aluminum ne kɔbere-kɔ-aluminum nkabom no hwɛ wɔ ɔkwan soronko so. Wɔkamfo mfonini ne nhwɛsode welding kyerɛ ansa na wɔawie nnwinnade nhyehyɛe no.

A: Yiw. Welding mfiri a ɛnyɛ-standard ne automation yɛ Haifei adwuma titiriw no fã.

Ebia sɛnea wɔyɛ no sɛnea wɔpɛ no bɛka:

• Mfiri a wɔde yɛ adwuma
• Mframa, nsu anaa servo nhyɛso nhyehyɛe
• Electrodes ne welding nnwinnade
• Nneɛma a wɔde yɛ adwuma
• Aduan a wɔde ma a ɛnyɛ adwuma
• Robot a wɔde fa nneɛma mu ne nea wɔde yi fi mu
• Multi-station dwumadie
• PLC ne HMI dwumadi ahorow
• Nnuan ho nyansahyɛ a wɔkora so
• Mfomso a wohu ne nea wosiw ano
• Welding data a wɔhwɛ so
• Factory nkitahodi ntam nkitahodi ahorow
• Ahobammɔ ho banbɔ
• Production-line nkabom

Wɔkyerɛkyerɛ baabi a etwa to no mu bere a wɔasan ahwɛ adwuma no ne nea wɔyɛ no ahwehwɛde ahorow mu awie no.

A: Yiw. Haifei betumi asusuw nhyehyɛe ahorow a edi mũ a ɛka aduanma, gyinabea, welding, ɔfã bi a wɔde kɔ baabi foforo, nhwehwɛmu, NG mpaapaemu, nneɛma a wɔayi fi mu ne data a wɔkyere gu kasɛt so bom.

Ɛsɛ sɛ adetɔfoɔ no de nneɛma ahodoɔ, botaeɛ a wɔde bɛfiri mu aba, adwumayɛbea nhyehyɛeɛ, nsuo a ɛwɔ soro ne aseɛ, nkitahodiɛ ahwehwɛdeɛ ne gyeɛ a wɔgye tom no ma ansa na wɔawie nhyehyɛeɛ no nhyehyɛɛ.

A: Yiw. Adetɔfoɔ bɛtumi de mfonini, nneɛma a wɔakyerɛkyerɛ mu anaa honam fam adwumayɛ ama de ayɛ mfiridwuma mu nhwehwɛmu ne nhwɛsoɔ sɔhwɛ.

Sɛ ebia wobetumi ayɛ sɔhwɛ bi a, egyina ɔkwan a wɔfa so yɛ no, nhwɛsode tebea ne sɔhwɛ nnwinnade a ɛfata a ɛwɔ hɔ so. Ansa na wɔbɛsɔ ahwɛ no, ɛsɛ sɛ afã abien no nyinaa si nea wɔbɛsɔ ahwɛ ne sɛnea wobebu nea ebefi mu aba no atɛn so dua.

A: Fa wo nsɛmmisa no fa email, WhatsApp anaa wɛbsaet nsɛmmisa kratasin no so mena. Fa wo workpiece mfonini, nneɛma, nsusuwii, welding gyinabea, output a wɔhwehwɛ ne automation level a wopɛ ka ho.

Sɛ HAIFEI hwɛ akwammisa no mu wie a, wɔbɛka ɔkwan a wɔakamfo akyerɛ, nnwinnadeɛ no kɛseɛ, nnwinnadeɛ, dwumadie a wɔpaw, sɔhwɛ a wɔhwehwɛ, nhyehyɛeɛ a wɔasusu ne aguadiɛ ho nsɛm ho asɛm.

A: Ebia mfonini bi dɔɔso ma nkɔmmɔbɔ a edi kan, nanso mpɛn pii no ɛnnɔɔso mma mfiridwuma mu asɛm a etwa to.

Ade koro no ara a ɛte sɛ - betumi de nneɛma ahorow, ne kɛse, emu nhyehyɛe anaa ne su gyinapɛn ahorow adi dwuma. Mpɛn pii no, wɔhwehwɛ sɛ wɔyɛ mfonini ne nneɛma a wɔde yɛ adwuma no ho nkyerɛkyerɛmu ansa na wɔatumi asi afiri no tumi ne nnwinnade no so dua.

A: Nhyehyɛe a wɔtaa yɛ di saa adeyɛ yi akyi:

• Fa adwuma ne adeyɛ ahwehwɛde ahorow kɔma
• Mfiridwuma mu nhwehwɛmu ne nhyehyɛe a wɔpaw
• Nhwɛsode sɔhwɛ bere a ɛho hia
• Hwɛ mfiridwuma ne aguadi ho nyansahyɛ no mu
• Si mfonini ahorow, nhyehyɛe ne adwuma no hye so dua
• Fa wo nsa hyɛ apam no ase anaa pene proforma invoice no so
• Yɛ nhyehyɛe ma wotua sika sɛnea nsɛm a wɔapene so no te
• Mfiri a wɔyɛ ne ne boaboa ano
• Commissioning ne adwumayɛbea a wogye tom
• Packing, shipment ne installation mmoa

Nnwuma a wɔayɛ no sɛnea wɔpɛ no betumi ahwehwɛ nhyehyɛe foforo-nhwɛso ne pene a wɔpene so.

A: Yiw, wobetumi asusuw anyinam ahoɔden nhyehyɛe ho sɛnea ɔman a wɔrekɔ ne adwumayɛbea a wɔde ma no te.

Yɛsrɛ sɛ si voltage a ɛwɔ hɔ, phase dodow ne frequency no so dua ansa na woahyɛ. Ɛsɛ sɛ wɔde transformer, voltage conversion anaa anyinam ahoɔden a wɔhwehwɛ titiriw biara ka mfiridwuma ho apam no ho.

A: Haifei yɛ adwuma wɔ ISO 9001 nhyehyɛe a wɔde hwɛ nneɛma pa so. Adwumakuw no wɛbsaet nso tintim CE ne 3C adansedi ho nsɛm ne bɛboro 40 tumi krataa ne software copyrights.Adansedi a wɔde di dwuma no gyina afiri pɔtee no, nhyehyɛe ne baabi a wɔrekɔ gua so. Ɛsɛ sɛ adetɔfo a wɔhwehwɛ adansedi krataa pɔtee bi si model ne krataa no kɛse so dua ansa na wɔakra.

A: Wobetumi ne HAIFEI adetɔn kuw no asusuw adansedi nkrataa a ɛfata ho. Ɛsɛ sɛ adetɔfoɔ kyerɛ sɛ wɔhia ISO 9001 nkrataa, CE nkrataa ma adeɛ pɔtee bi, 3C adansedie anaa gua-nwoma pɔtee foforɔ.

Ɛsɛ sɛ wɔhwɛ abodin krataa no din, ade a wɔakata so ne nea ɛyɛ nokware sen sɛ wɔde wɔn ho bɛto abodin krataa mfonini a ɛwɔ hɔ nyinaa so nkutoo.

A: Quality control tu mmirika denam ahwehwɛde nhwehwɛmu, design si so dua, component paw, nhyiam, commissioning ne awiei sɔhwɛ.

Wɔ nnwinnade a wɔayɛ no sɛnea wɔpɛ ho no, krataa a ɛho hia sen biara a wɔde di dwuma ne mfiridwuma ho apam a wɔapene so. Ɛkyerɛkyerɛ mfiri nhyehyeɛ, adwumayɛbea ahodoɔ, dwumadie, sɔhwɛ tebea ne gyedie ahwehwɛdeɛ a wɔde hwɛ mfiri a wɔawie no.

A: Yiw. HaifeiI de welding mfiri ne mfiri a wɔde yɛ adwuma akɔma adetɔfo a wɔwɔ amanaman ntam gua ahorow pii so. Wɔhwɛ nhyehyɛe a wɔde kɔ amannɔne no mu sɛnea mfiri no kɛse, baabi a wɔrekɔ, adwuma no kɛse ne nea wɔhwehwɛ sɛ wɔde besisi hɔ no te.

A: Wɔpaw ɔkwan a wɔfa so de nneɛma gu mu no sɛnea afiri no nhyehyɛe, ne nsusuwii, emu duru ne ɔkwan a wɔfa so de fa nneɛma te.

Ansa na wɔde nneɛma no bɛmena no, wɔbɔ nnwinnade no ho ban na wosiesie no sɛnea ɛbɛyɛ a ɛbɛtew kankyee ne ɔsɛe so bere a wɔredi ho dwuma no. Ɛsɛ sɛ wɔne adetɔfoɔ anaa nea ɔde nneɛma kɔma no hwɛ ɔkwan a wɔasi so dua a wɔfa so de nneɛma gu mu, nneɛma a wɔde ahyɛ mu no nsusuiɛ ne ahobanbɔ titire biara a wɔhwehwɛ.

Kwati sɛ wobɛhyɛ amansan packing specification ho bɔ efisɛ automated lines akɛse ne compact stand-alone welders hwehwɛ nhyehyɛe ahorow.

A: Ɔkwan a ɛfata no gyina afiri no kɛse, emu duru, baabi a wɔrekɔ ne bere a wɔhwehwɛ sɛ wɔde bɛkɔ no so. Haifei, adetɔfoɔ anaa obi a wɔapaw no sɛ ɔde nneɛma bɛmena no na ɔbɛtumi adi po so hyɛn nhyehyɛeɛ no ho dwuma sɛdeɛ aguadiɛ ho nhyehyɛeɛ a wɔapene soɔ no teɛ.

Ɛsɛ sɛ krataa a wɔafa aka no ka bere a wɔde bɛkɔ, baabi a wobefi, baabi a wɔrekɔ no ho asɛyɛde ne sɛ ebia nneɛma a wɔde fa, insurance, amanneɛbɔ a wɔde ma ne mpɔtam hɔ nneɛma a wɔde bɛkɔ no ka ho pefee.

A: Yiw. Wobetumi de nneɛma a wɔde ahyɛ mu no nsusuwii ne emu duru a etwa to ama bere a wɔasi afiri no ne nneɛma a wɔde kyekyere nneɛma ho nhyehyɛe no so dua awie no.

Wɔ nnwinnade akɛseɛ ho no, ɛsɛ sɛ adetɔfoɔ de nsusuiɛ a wɔahyɛ no den a wɔahyɛ no ma-ɛnyɛ mfiri no nsusuiɛ nko-di dwuma de hwɛ nsuo a wɔde gu mu, adwumayɛbea kwan a wɔfa so kɔ, ɔpon mu kwan, krane tumi ne forklift ahwehwɛdeɛ.