Wo Aluminum Diffusion Welder Yɛfoɔ a Ɔdi Kan
Wɔayɛ Haifei aluminium diffusion welders ama laminated aluminium foils, busbar terminals a ɛyɛ mmerɛw ne aluminium conductive afã horow a wɔapaw. Adwinnade no de anyinam ahoɔden a ɛko tia ɔhyew ne nhyɛso a wɔahyɛ so di dwuma de hyɛ baabi a wɔhwehwɛ sɛ wɔde nkwaa no yɛ den a dade a wɔde hyɛ mu a wɔtaa de di dwuma no nka ho.
Nsiesiei a ɛwɔ hɔ no bi ne mframa, mframa-nsuo, nsuo ne servo-nhyɛsoɔ nhyehyɛeɛ a wɔhwɛ so. Mfiri paw gyina aluminium grade, soro tebea, ankorankoro foil thickness, dodow a layers, bonding dimensions, awie terminal thickness ne ahwehwɛde production output.
Adetɔfoɔ bɛtumi de adwuma afiri mfonini ne ananmusifoɔ nhwɛsoɔ amena ama wɔayɛ nhyehyɛeɛ no mu nhwehwɛmu. Haifei betumi ahwɛ nkwaa nhyehyɛe no mu, ayɛ nhwɛsode sɔhwɛ ahorow wɔ baabi a ɛfata, ayɛ nnwinnade a wɔatu ho ama na akamfo nnwinnade nhyehyɛe a ɛfata akyerɛ.
Send Wo Aluminium Ɔfã Mfonini no
Nneɛma a ɛfa ho
-
![Aluminium Foil Ntrɛwmu Welding Afiri]()
Aluminium Foil Ntrɛwmu Welding Afiri600kVA Aluminium Foil Diffusion Welding Machine no de ɔhyew a wɔahyɛ so ne hydraulic nhyɛso di dwuma de bond stacked aluminium foils a enni solder anaa filler dade. Ɛfata sɛ wɔyɛ laminated...Hwɛ pii -
![Ntrɛwmu Welder Ma Aluminium Busbar]()
Ntrɛwmu Welder Ma Aluminium BusbarWɔayɛ HFVD-200-YS Diffusion Welder For Aluminum Busbar no ama aluminium busbars, aluminium nkitahodi a wɔayɛ no laminated, aluminium-nickel afã horow ne aluminium-kɔbere nkwaa. Servo-hydraulic...Hwɛ pii -
![Aluminium Busbar Welding Afiri a Wɔde Yɛ Adwuma]()
Aluminium Busbar Welding Afiri a Wɔde Yɛ AdwumaWɔayɛ HFVD-200-QY aluminium busbar welding afiri no ama laminated flexible connectors a wɔde 6-series aluminium strips, hard aluminium mprɛte ne nickel nkrataa. Controllers abien ne transformers...Hwɛ pii -
![Aluminium Busbar Afiri a Wɔde Yɛ Nneɛma a Ɛyɛ Den]()
Aluminium Busbar Afiri a Wɔde Yɛ Nneɛma a Ɛyɛ DenWɔayɛ Dual-Power Aluminum Busbar Solidification Machine no titiriw ama aluminium bus bars, aluminium connectors a ɛyɛ mmerɛw, ne conductive components wɔ ahoɔden foforo dwumadie mu. Ɛdenam tumi...Hwɛ pii -
![Aluminium a Ɛyɛ Nsakrae Busbar Welding Afiri]()
Aluminium a Ɛyɛ Nsakrae Busbar Welding AfiriWɔayɛ HFVD-100-Q Aluminum Flexible Busbar Welding Machine no sɛnea ɛbɛyɛ a ɛbɛhyɛ mmeae a ɛwɔ awiei a ɛwɔ aluminium foil stacks nketewa a wɔayɛ no laminated no mu den. HFVD-100-Q no de anyinam...Hwɛ pii -
![Aluminium Diffusion Welding Afiri a Wɔde Yɛ Adwuma]()
Aluminium Diffusion Welding Afiri a Wɔde Yɛ AdwumaWɔayɛ HFVD-200-Q Aluminum Diffusion Welding Machine no ama aluminium nneɛma welding, de mfiridwuma a ɛkɔ anim a ɛyɛ den a ɛtrɛw di dwuma de nya ahoɔden a ɛkorɔn welding a ɛwɔ aluminium busbars ne...Hwɛ pii -
![Diffusion Welder Ma Aluminium a Ɛyɛ Fɛ]()
Diffusion Welder Ma Aluminium a Ɛyɛ FɛWɔayɛ HFVD-200-Q Diffusion Welder For Aluminum no ama aluminium nnua, nhama ne nneɛma a wɔapaw a ɛma nsuo fa mu. Ɛka mframa-nsu nhyɛso ne ɔhyew a wɔahyɛ so, infrared ɔhyew a wɔhwɛ so ne nnwinnade...Hwɛ pii -
![Afiri a wɔde twitwiw nneɛma a wɔde di dwuma wɔ aluminium a wɔde di dwuma wɔ ɔkwan a ɛyɛ hu so .]()
Afiri a wɔde twitwiw nneɛma a wɔde di dwuma wɔ aluminium ...Aluminium diffusion welding afiri a Haifei yɛ no yɛ nea ɛda adi wɔ adwumayɛ a ɛkɔ soro, nneɛma a atwa yɛn ho ahyia ho banbɔ, ahobammɔ ne nea ɛyɛ den. Wɔde di dwuma kɛse wɔ ahoɔden battery soft...Hwɛ pii -
![Diffusion Welder a wɔde yɛ Aluminium]()
Diffusion Welder a wɔde yɛ AluminiumAluminium Diffusion Welding Machine yɛ nhyehyɛe titiriw a wɔayɛ ama ahoɔden a ɛkorɔn, sintɔ-a enni mu a wɔde bɛka aluminum alloys a enni nwene. Ɛde solid-state diffusion bonding mfiridwuma di...Hwɛ pii
Dɛn ne Diffusion Welding ma Aluminium Busbars?
Diffusion welding yɛ solid-state joining process a ɛde ɔhyew ne nhyɛso a wɔahyɛ so di dwuma de bond contacting metal surfaces a wɔmfa solder anaa filler metal nka ho. Wɔ aluminium busbar adwumayɛ mu no, wɔde ɔkwan no di dwuma titiriw de hyɛ aluminum foils a wɔaboaboa ano no afã horow a ɛwɔ awiei no mu den bere a wɔkora nsakrae so wɔ beae a wɔankyekyere no.
Wɔ adeyɛ no mu no, wɔde aluminium foils a wɔasiesie no hyia wɔ nnwinnade a wɔahyira so mu. Wɔde nhyɛso ba beae a wɔhwehwɛ sɛ wɔde bonding no, na ɛno akyi no, wɔde ɔhyew ne nea wɔde kura mu a wɔahyɛ so. Stack no kɔ so yɛ compressed bere a ɔhyew ne onwini ma enti terminal no du nea wɔhwehwɛ no kɛse ne ne nsusuwii.
Ɛsɛ sɛ wɔpaw aluminium diffusion welder no sɛnea aluminium grade, ankorankoro foil thickness, layers dodow, bonding dimensions ne ahwehwɛde wie terminal thickness. Wontumi mfi tumi a wɔahyɛ da ayɛ nkutoo mu nkyerɛ mfiri no nhyehyɛe.
Ɔkwan Bɛn so na Diffusion Welding Adeyɛ no Yɛ Adwuma?
Ahosiesie a Wɔyɛ wɔ Asase So
Wɔyi ngo, nsuo ne efĩ a ɛwɔ soro no firi aluminium ntama no mu. Ɛsɛ sɛ wosi ɔkwan a wɔfa so siesie no so dua sɛnea aluminium grade ne nkwaa no su a wɔhwehwɛ te.
01
Foil Stacking ne Nneɛma a Wɔde Sisi
Wɔde aluminum foils no boaboa ano sɛnea afiri no mfonini te na wɔde hyɛ adwinnade a wɔahyira so no mu. Stacking a ɛnteɛ betumi aka terminal thickness ne pressure distribution.
02
Nhyɛso a Wɔde Di Dwuma
Wɔde mframa, mframa-nsuo, nsuo anaa servo nhyɛsoɔ di dwuma wɔ bonding beaeɛ no nyinaa. Nhyɛso nhyehyɛe a wɔapaw no gyina foil stack, terminal trɛw ne ahoɔden a wɔhwehwɛ so.
03
Ɔhyew ne Nneɛma a Wɔkura a Wɔhyɛ So
Wɔma beae a wɔde bonding no yɛ hyew wɔ nhyɛso a wɔahyɛ so ase. Wɔnam adwumayɛbea nhyehyɛe ne nhwɛsode sɔhwɛ so na ɛkyerɛ ɔhyew, ɔhyew bere ne tebea a wɔde kura mu.
04
Onwini ne Nhwehwɛmu
Terminal no kɔ so yɛ compressed bere a onwini no. Sɛ wɔyi nneɛma fi mu wie a, adetɔfoɔ no bɛtumi ahwɛ ne kɛseɛ, ne hwɛbea, anyinam ahoɔden a ɛko tia ne mfiri adwumayɛ sɛdeɛ wɔapene so sɛ wɔbɛgye atom.
05
Aluminium Diffusion Welder Nhwɛso ne Nsiesiei
Aluminium foil stacks ne busbar terminals gu ahorow wɔ ne tɛtrɛtɛ, ne kɛse, layer nhyehyɛe ne nsusuwii a wɔawie a wɔhwehwɛ. Saa nsonsonoe yi ka ɔhyew tumi a wɔhwehwɛ, nhyɛso nhyehyɛe, nnwinnade nhyehyɛe ne onwini nhyehyɛe.
Ɛnsɛ sɛ wɔde kVA a wɔahyɛ da ayɛ no di dwuma sɛ ade koro pɛ a wobegyina so apaw afiri. Ebia nneɛma abien a ɛwɔ bonding area koro no ara behia nhyehyɛe ahorow sɛ wɔn aluminium grade, ankorankoro layer thickness anaa joint structure yɛ soronko a.
| Nsiesiei a Wɔde Yɛ Adwuma | Dwumadi no akwankyerɛ a ɛfata | Nneɛma atitiriw a ɛsɛ sɛ wosusuw ho wɔ paw ho |
| Mframa a wɔde yɛ adwuma | Aluminium foil stacks nketewa ne mmeae kakraa bi a wɔde bonding | Mframa nhyɛso a ɛwɔ hɔ, ahoɔden a wɔhwehwɛ ne nkwaa nsusuwii |
| Mframa-nsu a wɔde yɛ adwuma | Medium-size foil terminals ne nkitahodi ahorow a ɛyɛ mmerɛw | Force range, stroke, bere a wɔde kura ne cycle ahwehwɛde |
| Nsu a wɔde yɛ adwuma | Mmeae a ɛtrɛw a wɔde bonding, stacks a ɛyɛ den ne busbars akɛse | Nhyɛso kyekyɛ, tooling rigidity ne onwini a ɛyɛ den |
| Servo-a wɔhwɛ so | Components a ɛhwehwɛ programmable kankyee anaasɛ bɛn dimensional control | Force anaa displacement monitoring, aduannoa ho nyansahyɛ ne nhyehyɛe ho kyerɛwtohɔ |
| Nhyehyɛe a wɔayɛ no sɛnea wɔpɛ | Automatic loading, multi-station dwumadie anaa production-line nkabom | Output, nneɛma a wɔde di dwuma, nhwehwɛmu ne adwumayɛbea ntam nkitahodi |
Saa pon yi de akwankyerɛ a wɔde paw nea edi kan ma. Ɛsɛ sɛ wɔsi nhyehyeɛ a ɛtwa toɔ no so dua firi adwuma no ankasa, nhwɛsoɔ a ɛfiri mu ba ne gyedie gyinapɛn.
Nsɛm a ɛfa Aluminium Diffusion Welder ho
|
Nneɛma / Nhwɛsode |
Ɔfa |
HFTD-100-QY na ɛwɔ hɔ |
HFTD-200-Y na ɛwɔ hɔ |
|
Rated tumi a ɛwɔ hɔ |
KVA |
100 |
200 |
|
Tumi a wɔde ma |
V/Ø/Hz na ɛwɔ hɔ |
380V±10% / 3 fapem / 50Hz |
|
|
Rated adwuma kyinhyia |
% |
50% |
50% |
|
Mfitiaseɛ mprempren Max. |
A |
100 |
200 |
|
Mfitiaseɛ cable |
mm2 |
3*35+2*16 |
3*50+2*16 |
|
Tiatiaa-kwansin mprempren Max. |
KA |
80 |
160 |
|
Voltage a ɛto so abien |
V |
21 |
21 |
|
Mframa nhyɛso cylinder |
Ø*L |
Ø100*80 |
/ |
|
Nsu a wɔde yɛ cylinder |
Ø*L |
/ |
Ø100*100 |
|
Adwumayɛ mu nhyɛso Max. (0.5/10.5MPa) na ɛyɛ adwuma. |
KN |
50 |
100 |
|
Nsu a ɛma onwini a wɔhwehwɛ |
/ |
0.2-0.3MPa,40 micron filtration, Nneɛma a ɛko tia 5 kΩ. cm |
|
|
Nsu a wɔde yɛ onwini a wɔde di dwuma |
L/Min |
100 |
150 |
|
Menewa mu dɔ |
mm |
270 |
270 |
|
Ɔkwan a ɛda kɔbere mprɛte ntam |
mm |
180 |
180 |
|
Adwumayɛbea a wɔyɛ adwuma |
mm |
Ɔhyew: 1-45 digrii ɔhyew: 35-90 |
|
Aluminum Diffusion Welder no dwumadi ahorow
2. Welder no wɔ dwumadi ahorow a ɛfa grinding alarm, welding voltage ankasa-bere monitoring display, welding dodow, welding mprempren over-anohyeto alarm.
3. Welding controller no wɔ adwuma a ɛyɛ mfomso ankasa-diagnosis, welding voltage abnormal alarm, a ɛtew bere a wɔde siesie so.
4. Ɛwɔ kakraa bi a wobetumi apaw ma nhyɛso tumi, mframa, mframa plus hydraulic, hydraulic, anaa servo motor..
5. Infrared ɔhyew detection, real-bere hwɛ welding ɔhyew.
6. Nsuo kyinhyia onwini ma nsuo ka so tew.
Nneɛma a wɔde di dwuma wɔ Aluminium Diffusion Welding mu
EV ne Battery Busbars a wɔde yɛ adwuma
Wɔde di dwuma de boa laminated aluminum foil terminals ma battery packs, tumi kyekyɛ units ne anyinam ahoɔden nkitahodi.
Ahoɔden a Wɔkora So Nkitahodi
Ɛfata ma aluminium conductors a ɛyɛ mmerɛw a wɔde di dwuma wɔ battery cabinets, ahoɔden akorae modules ne tumi nsakrae mfiri.
Electrical Switchgear a Wɔde Yɛ Nneɛma
Wɔde di dwuma ma laminated busbars ne flexible conductive connections baabi a ɛsɛ sɛ wɔhwɛ terminal dimensions ne anyinam ahoɔden adwumayɛ so.
Nnwinnade a Wɔde Kyɛ Tumi
Ɛfa aluminium busbars a wɔayɛ no sɛnea wɔpɛ, foil connectors ne aluminium-to-kɔbere conductor nhyehyɛe ahorow a ɛhyɛ nhwɛsode nhwehwɛmu ase ho.
Ahwɛyiye a Wɔde Di Dwuma wɔ Aluminium Diffusion Welder mu
- Fa organic solvent te sɛ acetone anaa alkaline solution a ɛnyɛ den te sɛ samina a ano yɛ den yi ngo, srade, ne nsu a ɛyɛ hyew. Wubetumi nso de citrus-based degreasers adi dwuma, nanso hwɛ hu sɛ wobɛhohoro na woayow ɔfã no ansa na woayɛ welding.
- Fa dade a ɛnyɛ den waya brɔs (a wɔde yɛ aluminium nkutoo) anaa alkaline anaa acid a ano yɛ den yi oxides a ɛwɔ soro no fi hɔ. Wɔn a wɔde welding ma no pii tɔn oxide-removal solutions wɔ spray anaa squeeze nkotoku mu de di dwuma wɔ mpɔtam hɔ. Fa ahwɛyiye kɛse di dwuma bere a woredi saa nnuru yi ho dwuma no, na bio, hohoro ɔfã no na ma ɛyow ansa na woayɛ welding.
- Boaboa nkwaa no ano. Sɛ wɔanwe no ntɛm ara a, fa Kraft krataa a ɛyɛ bruu kata nkwaa no so na efĩ ne akisikuru a ɛwɔ mframa mu no ankɔ nkwaa no mu.
- Ma aluminium no nwo na ma ɛnyɛ dan mu hyew.
- Weld wɔ nna kakraa bi mu. Sɛ wɔanhyehyɛ nkwaa no bio wɔ saa bere no mu a.
Sɛnea Wobɛpaw Aluminium Diffusion Welder a Ɛfata
Pneumatic, Hydraulic anaa Servo Nhyɛso a Wɔpaw
| Pneumatic Systems a Wɔde Yɛ Aluminium Afã Nketewa |
Mframa nhyɛso betumi afata ama foil nketewa a wɔaboaboa ano ne mmeae a ɛkyekyere kakraa bi a ahoɔden a wɔhwehwɛ no wɔ baabi a ɛwɔ hɔ no. Ɛnsɛ sɛ gyinaesi no gyina nipadua mu kɛse a ɛwɔ ade no mu nkutoo so. Adwuma ketewa bi a ɛwɔ terminal a ɛtrɛw anaasɛ consolidation ahwehwɛde a ɛkorɔn betumi akɔ so ahia ahoɔden nhyehyɛe a ɛkorɔn-. |
| Pneumatic-Nsuo Nhyehyɛeɛ ma Medium-Size Nkitahodifoɔ |
Pneumatic-hydraulic booster de adwumayɛbea mframa a wɔde ma no di dwuma de yɛ hydraulic output. Wobetumi asusuw saa nhyehyɛe yi ho ama aluminium nkitahodi ahorow a ne kɛse yɛ mfinimfini-a ɛhwehwɛ ahoɔden pii sen nea mframa cylinder a ɛyɛ gyinapɛn betumi de ama. Ɛsɛ sɛ wosi mframa nhyɛso a ɛwɔ hɔ, stroke a wɔhwehwɛ, bere a wɔde kura mu ne adeyɛ kyinhyia no so dua ansa na wɔapaw. |
| Hydraulic Systems a Wɔde Ma Mmeae a Ɛtrɛw a Bonding |
Wɔtaa susuw nsu nhyɛso ho ma aluminium stacks a ɛyɛ den, mmeae a ɛtrɛw a ɛka bom ne nneɛma a ɛhwehwɛ ahoɔden a ɛkorɔn anaa ɛyɛ den bere a wɔreyɛ ɔhyew ne onwini no. Nhyɛso a ɛyɛ pɛ ho hia wɔ nkwaa a edi mũ no nyinaa so. Nsu ahoɔden nkutoo ntumi ntua foil a ɛnyɛ pɛpɛɛpɛ, nnwinnade a ɛnyɛ pɛpɛɛpɛ anaasɛ ɔfasu ho ahosiesie a ɛmfata no so ka. |
| Servo-Nhyehyɛe a wɔahyɛ so ma Dwumadie a Wɔhwɛ so |
Wobetumi asusuw servo-controlled system ho bere a adwuma no hwehwɛ sɛ wɔhwɛ kankyee, ahoɔden anaa tu a wɔtu kɔ baabi foforo a wotumi yɛ ho nhyehyɛe, nneɛma pii a wɔyɛ anaasɛ wɔde ka bom ne automatic line. Dwumadi ahorow a ɛwɔ hɔ a wɔde hwɛ nneɛma so na wɔkyere gu kasɛt so no gyina nnwinnade nhyehyɛe a wɔapene so no so. Ɛsɛ sɛ wɔkyerɛkyerɛ data fields ne interfaces a wɔhwehwɛ mu wɔ mfiridwuma mu nhwehwɛmu no mu. |
Nea Enti a Yɛpaw Yɛn Aluminium Diffusion Welder
Yɛwɔ osuahu pii wɔ diffusion welding ne resistance welding mfiri a wɔyɛ mu, yɛyɛ yɛn mfiri no ho nhyehyɛe titiriw twa oxidation suban ne ɔhyew su a ɛwɔ aluminium nneɛma mu ho hyia. Yɛn ano aduru no de adwumayɛ a ɛyɛ pintinn, nea efi mu ba a wotumi san yɛ bio, ne nneɛma a wɔyɛ no tumi a wotumi sesa ma, boa adetɔfo fi nhyehyɛe a wɔma ɛyɛ nokware kosi nneɛma a wɔyɛ no pii so.
FAQ
Asɛmmisa: Dɛn ne Aluminium Diffusion Welder?
A: Aluminium diffusion welder yɛ welding afiri titiriw a ɛka aluminium nneɛma bom denam ɔhyew ne nhyɛso a enni filler dade so. Wɔde di dwuma kɛse ma aluminium busbar welding, battery connector a wɔyɛ, ne anyinam ahoɔden afã horow a ɛyɛ kɛse-conductivity.
Asɛmmisa: Nneɛma Bɛn na Aluminium Diffusion Welding Machine Betumi Ayɛ Weld?
A: Aluminium diffusion welding afiri betumi weld aluminium busbars, aluminium foils, laminated conductors, battery tabs, ne aluminium afã afoforo a ɛma nsu fa mu. Wobetumi nso ayɛ no sɛnea wɔpɛ ama aluminium-kɔ-kɔbere diffusion bonding dwumadie.
Asɛmmisa: So Aluminium Diffusion Welding Fata Ma Batere Busbars?
A: Yiw. Wɔde aluminium diffusion welding di dwuma kɛse ma EV battery busbars, ahoɔden a wɔkora so busbars, ne tumi kyekyɛ nkitahodi ahorow. Adeyɛ no ma nkwaa a ɛyɛ den a anyinam ahoɔden a ɛko tia no sua na ɛma nsu fa mu yiye.
Asɛmmisa: So Aluminium Diffusion Welder betumi aka Aluminium Foil a ɛwɔ ntoatoaso pii ho?
A: Yiw. Aluminium foil diffusion welding afiri betumi akyekyere aluminium foil ntoatoaso pii ayɛ no nkitahodi a ɛyɛ den a ɛma nsu fa mu. Wɔtaa de saa kwan yi di dwuma wɔ nkitahodi ahorow a ɛyɛ mmerɛw, batere, ne anyinam ahoɔden nhyehyɛe ahorow mu.
Asɛmmisa: Dɛn ne Mfaso a Ɛwɔ Aluminium Busbar Diffusion Welding so?
A: Aluminium busbar diffusion welding ma nkwaa ahoɔden a ɛkorɔn, nkitahodi a ɛba fam a ɛko tia, ne anyinam ahoɔden adwumayɛ a ɛyɛ den. Ɛyi filler nneɛma fi hɔ na ɛboa ma conductivity a ɛho hia ma battery ne power distribution applications no kɔ so tra hɔ.
Asɛmmisa: So Diffusion Welding betumi aka Aluminium ne Kɔbere Bom?
A: Yiw. Aluminium-to-kɔbere diffusion welding afiri a wɔayɛ no sɛnea wɔpɛ no betumi ayɛ dade nkitahodi a wotumi de ho to so wɔ aluminium ne kɔbere nhama ntam. Wɔtaa de ano aduru yi di dwuma wɔ batere nhyehyɛe, anyinam ahoɔden mfiri, ne anyinam ahoɔden ɛlɛtrɔnik mu.
Asɛmmisa: Nnwumakuw Bɛn na Wɔde Aluminium Diffusion Welding Mfiri Di Dwuma?
A: Wɔtaa de aluminium diffusion welding mfiri di dwuma wɔ anyinam ahoɔden kar a wɔyɛ, batere a wɔyɛ, ahoɔden a wɔkora so nhyehyɛe, ahoɔden a wɔde fa so, anyinam ahoɔden switchgear, ne ahoɔden a wɔyɛ no foforo a wɔde di dwuma mu.
Q: Nsonsonoe bɛn na ɛda Aluminium Diffusion Welding ne Resistance Welding ntam?
A: Aluminium diffusion welding yɛ metallurgical bond denam ɔhyew ne nhyɛso a wɔahyɛ so, bere a resistance welding de ne ho to anyinam ahoɔden so de bɔ nkwaa no. Wɔtaa pɛ diffusion welding ma high-conductivity aluminium busbars ne laminated conductors.
Asɛmmisa: So Aluminium Diffusion Welding Ma Foils no yɛ mmerɛw?
A: Wɔayɛ adeyɛ no sɛnea ɛbɛyɛ a ɛbɛhyɛ aluminium foil layers no mu den wɔ ɔhyew ne nhyɛso a wɔahyɛ so a enhia sɛ adwuma no nwene kɛse. Ɛsɛ sɛ wɔfa nneɛma, foil nhyehyɛe ne sample-sɔhwɛ ahwehwɛde ahorow so si ɔhyew ankasa ne tebea a wɔde kura mu no so dua.
Wuxi Haifei Intelligent Equipment Co., Limited yɛ nea wonim no yiye-sɛ aluminium diffusion welder ayɛfo ne wɔn a wɔde ma wɔ China no mu biako. Yɛsrɛ sɛ nya awerɛhyem sɛ wobɛtɔ aluminium diffusion welder a ɛkorɔn a wɔayɛ wɔ China ha afi yɛn adwumayɛbea hɔ. Sɛ wopɛ sɛ wususuw nneɛma bo ho a, di yɛn ho nkɔmmɔ.
